ORDINANCE NO. 82-512follows:
CITY OF HOPKINS
Hennepin County, Minnesota
ORDINANCE NO. 82 -512
AN ORDINANCE AMENDING HOPKINS ZONING ORDINANCE
NO. 427 TO ADD PROVISIONS FOR MANUFACTURED SINGLE
FAMILY HOMES
BE IT ORDAINED, by the City Council of the City of Hopkins as
That Sections 427.28 and 427.31 are hereby amended by adding the
following sections:
SECTION 1 MANUFACTURED SINGLE FAMILY HOMES DEFINED: Manufactured
Single FAmily Home is a structure transportable in one or more sections which
in the traveling mode is eight (8) body feet or more in width and forty (40)
feet or more in length or when erected on a site in the proper residential
district will have an area of Three Hundred Twenty (320) or more square
feet and which is built on a permanent foundation or chassis and designed to
be used as a dwelling for one family, and is connected to the required utilities
and includes the plumbing, heating, air conditioning and electrical systms
contained therein and complies with all of the provisions of the Manufactured
Homes Building Code cited as Minnesota Statutes Annotated Chapters 327.31
through and including 327.36, the contents of which statutory sections are
hereby adopted and enacted with the same force and effect as though set forth
herein verbatim.
SECTION 2 PERMITTED LOCATIONS OF MANUFACTURED SINGLE FAMILY HOMES
Manufactured Single Family Homes may be permitted, erected, located or
relocated in the following Zoned Residential Districts under the following
conditions:
a. In R -1 and R -2 Zoning districts, any and all dwellings of any
kind shall be subject to and governed by all of the provisions
of the Minnesota State Building Code
b. In all other Residential (R) Districts, such Manufactured
single family homes may be permitted or relocated provided they
include permanent foundations and are governed by all of the
pertinent provisions of M.S.A. 327.31 through 327.36 and by
other general regulations which may be from time to time
established.
c. In R -1 and R -2 Zoning Districts, any and all dwellings of any
kind must have a minimum width of twenty (20) feet and a
minimum height of fourteen (14) feet.